Double cutter bar mowers
Rear-mounted tractor mowers with two moveable cutter bars designed for cutting all types of grass, forage plants and medicinal herbs, as well as for public utility works. This type of mower is equipped with high-quality cutter bar made in Germany (Busatis system) and can be used for mowing even under difficult conditions, such as: flattened and tangled grass, damp terrain, terrains with molehills, slopes, during moderate rainfall, etc.
Advantages:
– Faster regeneration of plants and therefore greater yield
– Can be used in vertical position (+90 degrees) for trimming hedges, etc.
– Scatters and lays mowed mass (does not flatten swath by pressure), shortening drying time and facilitating operation of wheel rakes
– Low cost and easy maintenance
Technical characteristics
Type | FPM 804.209 | FPM 804.218 | FPM 627.794 | FPM 627.119B | FPM 627.795 | FPM 627.120B | FPM 627.717 |
Working width (m) | 1,25 | 1,6 | 1,6 | 1,7 | 1,8 | 1,9 | 2,0 |
Number of cutter bars / number of knives | 2/32 | 2/42 | 2/42 | 2/45 | 2/50 | 2/51 | 2/54 |
Linkage | 3-point | ||||||
Tractor category | 1N | I,II | |||||
Tractor minimum power output, kW (hp) | 18(24) | 25(34) | |||||
Tractor output shaft RPM (r/min) | 540 | ||||||
Maximum tractor operating speed (km/h) | 12 | ||||||
Maximum work rate (ha/h) | 1,5 | 1,9 | 1,9 | 2 | 2,1 | 2,3 | 2,5 |
Cutting height (cm) | 3-9 | ||||||
Swath width (m) | 1 | 1,35 | 1,35 | 1,45 | 1,55 | 1,65 | 1,75 |
Cutter bar lifting system | manual | manual (option hydraulic) | |||||
Safety mechanism | yes (float spring) | ||||||
Width in transport position | tractor width+20cm | ||||||
Weight (kg) | 152 | 162 | 165 | 170 | 175 | 185 | 197 |